Articles on: 🛠 Use Moona

🛠 How do I fill Moona’s water tank?

This step is carried out after setting up and connecting your bedside device and pillow. It is also used after a change of water of the bedside device and the pillow, a complete cleaning or a use after a prolonged rest of your Moona.

If you are using your Moona for the first time, make sure the pillow pad is plugged into the bedside device with the tubing and cable, at the same level or slightly lower than the bedside device. Then:
1) Switch on your Moona (I/O button on the back of the bedside device)
2) Open the flap at the top right side of the product and open the lid
3) Fill up to the MAX level (roughly 800ml / 27 fl.oz.) of distilled water (we recommend to mix with 1 teaspoon (5ml) of household Hydrogen Peroxide solution), up to 2/3rd of the water tank window
4) With the cap off, tilt your device left and right for 5 seconds each. This is to help any air bubbles escape your device.
5) Repeat step 3) and 4) with the pillow pad still placed at the same level as the bedside device, until the water level is stable around the MAX level.
6) Press the O button. Do not move the pillow pad or the bedside device (a ✅ should appear on the device screen after a few seconds of self-test)
7) Close the lid on top of the filling funnel once the self-test is done

If you have already used your Moona and it asks for water: 🛌🏻 I see a blinking "water drop" icon on Moona's screen

WARNING: respect these instructions to avoid overflowing! Be careful not to let water run through your Moona's air shaft.

#fill #filling #distilled #water #pouring #funnel #tank

Updated on: 21/12/2022

Was this article helpful?

Share your feedback


Thank you!